“Plans are nothing. Planning is everything.” -Dwight Eisenhower
After a week of volunteering, I jumped headlong into my sabbatical project, a dining room table inspired by Sidney Barnsley’s hay rake table. So far, it’s felt like planing is everything.
One of my goals for this project was to use the swamp white oak lumber I harvested in 2008. Many of those boards were wide planks, 12″ and wider, with a few that were 17″ wide and over 8′ long. At 2″ thick, these widest boards weighed in at 90 lbs each, so this first week has been mostly about wrestling big planks, jointing them flat and planing them to a uniform thickness.
Had I gone to the lumber yard and purchased the lumber, I could have picked boards with less twist or fewer defects, but I wouldn’t have had the same connection to the wood – wood I’ve taken from tree trunk to planks, and now to table.
What’s emerging from the bushels of shavings are four boards, each with a gentle arc to the grain that will come together to suggest an ellipse in the rectangular tabletop and provide an interesting counterpoint to the series of butterfly splines I’ll inlay down the center of the table.
I’ll edge joint and rip each to 10″ wide before the glue-up. Given the amount of twist I had to contend with, it wasn’t practical to insist on using the full width of those 17″ boards. It turned out to be a good decision, granting me much more flexibility and permission.
My initial plan was to do the project in the remaining three weeks I’d have after my week of service, allowing about a week for the top, a week for the base, and a week for the finish. This plan gave me plenty of flexibility: if I need to, I can apply the finish once I return to work. I also left my weekends free in this plan, so if it’s close, I can work through my two remaining weekends.
While I underestimated the work It would take to joint the tabletop pieces, I learned a lot for the next project, and I’m grateful for the flexibility I left in my plan at the start.